Barrier post, semi-automatic lowering, hot dip galvanised.

Estimated delivery: 39 days

Barrier post, semi-automatic lowering, hot dip galvanised

• Supplied = assembled
• Height = 2050 mm
• Height above ground = 900 mm
• Post dimensions = 76 mm
• Material = steel
• Finish = hot dip galvanised
• Post colour = hot dip galvanised
• Design = can be lowered
• Type of mounting = for setting in concrete
• Mounting = with ground sleeve
• Place of use = indoor and outdoor use
• Design of head = flat head
• Depth below ground = 1150 mm
• Tube form = round
• Lock type = triangular utility lock
• Weight = 22 kg
• Product type = bollards/barrier posts made of steel
• Customs tariff number = 73089098
• Country of origin = DEU
• Gross weight = 22.8 kg
• Weight = 22 kg
• For the temporary release of traffic areas
• Hot-dip galvanised quality steel
• Easy installation
• With ground sleeve for setting in concrete
• Upper part can be easily replaced
• This barrier post is an elegant solution for when access roads, paths or restricted areas need to be temporarily opened up, without creating a tripping hazard once the barrier is removed
• Ideal for pedestrian zones, market squares, car parks, garage driveways, archways etc
• The post can be retracted in seconds using a surface hydrant key in accordance with DIN 3223: Traffic can then roll unhindered over the ground sleeve, which is concreted in almost flush with the surface
• Overall height 2050 mm, of which 1150 mm is below ground
• Diameter: upper section: 76 mm, lower section: 100 x 100 mm
• Easy to install
• The upper section can be replaced if damaged
• Semi-automatic: After being unlocked with the triangle key, the gas pressure spring automatically raises the upper section from the ground sleeve
• After being raised slightly, the post locks automatically
• The unlocked upper section is lowered simply by pushing it down
• Installation note: ensure proper drainage (fill with gravel)
• The PARATlift may not be installed in standing water (e.g. ground water)
• Maintenance: important for flawless function
• Remove any dirt that has accumulated, clean all moving parts and grease the locking hook at least every six months.