Steel wire mesh shelf unit, chrome plated, max. shelf load 100 kg, WxD 1520 x 360 mm, standard shelf unit, height 1370 mm, 4 shelves.

Estimated delivery: 89 days

Steel wire mesh shelf unit, chrome plated, max. shelf load 100 kg, WxD 1520 x 360 mm, standard shelf unit, height 1370 mm, 4 shelves

• Supplied = flat pack
• Shelf unit type = standard unit
• Shelf unit height = 1370 mm
• Width = 1520 mm
• Depth = 360 mm
• Shelf width = 1520 mm
• Shelf depth = 360 mm
• Max. bay load = 1500 kg
• Max. shelf load = 100 kg
• Number of shelves = 4 pcs
• Material = steel wire, chrome plated
• Colour = silver
• Design = plug-in system
• Product type = modular boltless shelving units
• Customs tariff number = 94032080
• Country of origin = CHN
• Gross weight = 25.28 kg
• Weight = 22.08 kg
• Sustainability = CO 2 footprint calculated
• Professional quality for the highest demands - glossy, easy care, clear visibility from all sides
• No memory effect for a temporary heavy load, as the shelves are made of steel wire
• Impact and scratch resistant, resistant against oils, greases and many alkalis and acids
• Can be infinitely extended, suitable as a room partition and for attractively presenting goods
• The universal shelving system
• Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves
• Where S hooks are used, the max. shelf load is reduced to 100 kg
• Can be set up without tools and highly versatile - in store rooms, archives, offices, shops
• Only a rubber hammer is required to secure the height adjustment screws
• Mobile on non-marking, ball bearing mounted PVC swivel castors
• The PVC swivel castors are available with or without wheel stops (see accessories)
• The PVC swivel castors increase the shelf unit height by 170 mm
• Mesh shelves Height adjustable in 25 mm increments, triple nickel plated with chrome finish
• Uprights, Ø 25 mm 2 part - easy to construct by screwing together
• Triple nickel plated, with chrome finish
• Incl. end caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm
• The uprights of 2 shelf units can be connected using connecting clamps (accessory post connecting clamps)
• This results in a gap between shelves of 15 mm
• Please note If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners
• The shelf posts reduce the effective width and depth of the shelves by 25 mm per post
• The specified max. loads apply with uniform load distribution
• Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.