Steel wire mesh shelf unit, black, max. shelf load 100 kg, WxD 910 x 360 mm, standard shelf unit, height 2180 mm, 6 shelves.

Estimated delivery: 31 days

Steel wire mesh shelf unit, black, max. shelf load 100 kg, WxD 910 x 360 mm, standard shelf unit, height 2180 mm, 6 shelves

• Supplied = flat pack
• Shelf unit type = standard unit
• Shelf unit height = 2180 mm
• Width = 910 mm
• Depth = 360 mm
• Shelf width = 910 mm
• Shelf depth = 360 mm
• Max. bay load = 1500 kg
• Max. shelf load = 100 kg
• Number of shelves = 6 pcs
• Material = steel wire
• Colour = black
• Design = plug-in system
• Shelf unit design = single sided
• Product type = modular boltless shelving units
• Customs tariff number = 94039910
• Country of origin = CHN
• Gross weight = 26.86 kg
• Weight = 24.06 kg
• Always visually attractive, easy to care for and with clear visibility from all sides
• Infinitely extendable, also suitable as a room partition
• No memory effect for a temporary heavy load
• With high quality black plastic coating Can be set up without tools and highly versatile - in store rooms, archives, offices, shops
• Only a rubber hammer is required to secure the height adjustment screws
• Optimum use of space by constructing extension or corner shelf units using S hooks. 2 S hooks per shelf are supplied with the extension shelf units and with additional shelves
• Where S hooks are used, the max. shelf load is reduced to 100 kg
• Mobile on non-marking, ball bearing mounted PVC swivel castors
• The PVC swivel castors are available with or without wheel stops (see accessories)
• The PVC swivel castors increase the shelf unit height by 170 mm
• Mesh shelves Height adjustable in 25 mm increments
• Uprights, Ø 25 mm 2 part - easy bolt together assembly
• Incl. top caps and height adjustment screws to compensate for uneven flooring up to a height of 20 mm
• The uprights of 2 shelf units can be connected using connecting clamps (see accessories)
• This results in a gap between shelves of 15 mm
• Please note If the height of the shelf unit is more than 5 times its depth, the shelf unit must be secured against tipping
• The uprights reduce the effective width and depth of the shelves by 25 mm per upright
• The specified max. loads apply with uniform load distribution
• Additional shelves may be used if the specified max. bay load or the max. load of the swivel castors is observed.