Traffic Paint® marking paint, contents 500 ml, pack of 12, blue.

Estimated delivery: 33 days

Traffic Paint® marking paint, contents 500 ml, pack of 12, blue

• Supplied = assembled
• Signal word = Gefahr
• Hazard warning = h222: extremely flammable aerosol, h229: pressurised container: may burst if heated, h319: causes severe eye irritation, h336: may cause drowsiness and dizziness
• Supplementary hazard information = EUH066: repeated contact can lead to brittle or cracked skin
• Safety information = P210: keep away from heat, hot surfaces, sparks, open flames and other ignition sources
• Do not smoke, P211: do not spray on an open flame or other ignition source, P251: Do not pierce or burn, even after use., p410+P412: protect from sunlight, do not expose to temperatures exceeding 50°C, P501: dispose of contents/container to …
• Colour = blue
• Contents = 0.5 l
• Drying time = 20 min
• Hazard class = GHS02, GHS07
• Product type = spray paints
• Customs tariff number = 32082090
• Country of origin = FRA
• Gross weight = 7.4 kg
• Weight = 7.1 kg
• Sustainability = CO 2 footprint calculated
• With high pigment content
• Hard-wearing and weatherproof
• Special nozzle for sharp-edged markings
• Resistant to temperature fluctuations
• No CFCs, lead, cadmium or toluene
• Traffic Paint® road marking paint - for professional and economic marking in indoor and outdoor areas
• Ensure precise markings on the ground in your car parks and routes within the company
• Grey and black paint is used to cover markings which are no longer required
• Dries quickly: Dry in approx. 20 minutes
• Hard in approx 4 hours
• Can be driven on after approx. 12 hours
• Yield: Depending on the set line width, one box of 12 cans will cover approx. 600 m
• To prevent the can from clogging, briefly spray the nozzle free of residue after use
• Pack of 1 box containing 12 cans
• Please note Test the paint prior to application, as adhesion can vary according to the road surface and weather conditions
• When marking sealed or treated surfaces, we recommend testing the paint for compatibility, drying time and adhesion in each case
• The surface may need to be briefly sanded back or a primer may need to be used to ensure optimal adhesion
• If the surface has not be prepared accordingly, the marking paint may peel off after a short period of time.