Road marking paint, 5 kg pail, yellow.

Estimated delivery: 33 days

Road marking paint, 5 kg pail, yellow

• Supplied = assembled
• Signal word = Achtung
• Hazard warning = h226: flammable liquid and vapour, h362: may cause harm to breast-fed children, h373: May cause damage to organs through prolonged or repeated exposure, h319: causes severe eye irritation, h336: may cause drowsiness and dizziness, h410: very toxic to aquatic life with long lasting effects
• Safety information = P210: keep away from heat, hot surfaces, sparks, open flames and other ignition sources
• Do not smoke, p337+P313: if eye irritation persists: get medical advice/attention, P280: wear protective gloves/protective clothing/eye protection/face protection, p304+P340: remove person to fresh air
• Colour = yellow
• Contents = 3.03 l
• Drying time = 20 min
• Hazard class = GHS02, GHS07, GHS08
• Product type = outdoor marking paints
• Customs tariff number = 32082090
• Country of origin = PRT
• Gross weight = 5.3 kg
• Weight = 5 kg
• Sustainability = CO 2 footprint calculated
• For application in indoor and outdoor areas
• Highly resistant to wear and weather
• Dries quickly
• Traffic Road Marking Paint® Road marking paint for professional markings on concrete or asphalt roads
• Application using a roller, brush or spray method ( not suitable for an airless sprayer)
• Use with Traffic Paint thinner for application using the spray method (see Accessories)
• Areas of application: Marking parking spaces, marking roads, marking halls, marking company premises, marking special fields, marking race tracks, coatings and much more
• Dries quickly: Dry: approx. 20 minutes
• Hard: approx 4 hours
• Can be driven on after approx. 12 hours. *Colours may exhibit slight differences to the RAL numbers specified
• Please note: Test the paint prior to application, as adhesion can vary according to the road surface and weather conditions
• When marking sealed or treated surfaces, we recommend testing the paint for compatibility, drying time and adhesion in each case
• The surface may need to be briefly sanded back or a primer may need to be used to ensure optimal adhesion
• If the surface has not be prepared accordingly, the marking paint may peel off after a short period of time.