UNO W workshop cleaner, pack of 10 x 1 l bottles, low foaming.

Estimated delivery: 39 days

UNO W workshop cleaner, pack of 10 x 1 l bottles, low foaming

• Supplied = assembled
• Signal word = Gefahr
• Hazard warning = h318: causes severe eye damage, h315: causes skin irritation
• Safety information = p305+P351+P338: rinse with water, remove contact lenses, continue rinsing, P310: immediately call a poison centre/doctor/…, p302+P352: if on skin: wash with plenty of water/., p332+P313: if skin irritation occurs: consult a doctor
• Area of application = workshop
• Model = concentrate
• Contents = 1 l
• Weight = 10.3 kg. pH value = 13
• Weight per item = 1.03 kg
• Hazard class = GHS05
• Colour = -
• Material = solution
• Product type = surface cleaning agents
• Customs tariff number = 34025090
• Country of origin = DEU
• Gross weight = 46763.72 kg
• Weight = 10.3 kg
• Water-based, alkaline workshop cleaner
• Highly concentrated, mixing ratio 1:40 with water
• Low foaming, suitable for use on machinery
• No phosphates, does not damage materials and non abrasive
• Temporary corrosion protection
• UNO W is a water-based alkaline cleaner suitable for universal use in the workshop area
• Its effective formula allows the removal of dirt typical to the workshop, such as oils, greases, resins, waxes, nicotine, insect grime, soot and bitumen and tar splashes
• Its high level of material compatibility makes it possible to clean machines, tools, workshop equipment and vehicles without damaging the base material
• It is not aggressive on metals, plastics, tiles, wood or rubber, and does not contain phosphates
• Moreover, UNO W features temporary corrosion protection to protect metals prone to rust
• The low foaming formula not only allows it to be used manually, but also in high pressure cleaners, floor cleaning equipment and spray extraction equipment
• In addition, UNO W ÖNORM B 5105 has been tested (registration number ON-N 2011 139) and is therefore compatible with oil traps
• Instructions for use: apply concentrated or diluted with water by a ratio of up to 1:40, allow to act, rinse off
• Do not apply to aluminium or zinc coatings as a concentrate.