Industry Floor Paint® ground marking paint, capacity 5 l, white.

Estimated delivery: 34 days

Industry Floor Paint® ground marking paint, capacity 5 l, white

• Signal word = Achtung
• Hazard warning = h226: flammable liquid and vapour, h362: may cause harm to breast-fed children, h319: causes severe eye irritation, h335: May cause respiratory irritation, h336: may cause drowsiness and dizziness, h410: very toxic to aquatic life with long lasting effects
• Supplementary hazard information = EUH066: repeated contact can lead to brittle or cracked skin
• Safety information = P210: keep away from heat, hot surfaces, sparks, open flames and other ignition sources
• Do not smoke, p337+P313: if eye irritation persists: get medical advice/attention, P280: wear protective gloves/protective clothing/eye protection/face protection, p304+P340: remove person to fresh air
• Colour = white
• Contents = 5 l
• Hazard class = GHS02, GHS07, GHS08, GHS09
• Product type = floor paints
• Customs tariff number = 32082090
• Country of origin = PRT
• Gross weight = 5.5 kg
• Weight = 5 kg
• Sustainability = CO 2 footprint calculated
• For indoor use
• Easy to use
• Hardwearing and durable
• Ground marking paint - for indoor use
• Extremely easy to work with, lends the surface a satin finish
• Ideally suited for use on industrial floors, in warehouses, utility rooms, garages, car parks and much more
• Industry Floor Paint® ground marking paint - Easy to clean - Does not yellow - Chemical resistant - VOC: max. 500 g/l - Application temperature: +10 °C to +30 °C - Application by means of a short-haired roller - Thinning and tool cleaning: Solvent Floor Paint® thinner (see accessories) - Drying time: dries in approx. 1 hour, can be painted over in approx. 8 hours Yield: up to 10 m²/l per coat ATTENTION: prior to application, the floor should be cleaned and any dust be removed
• IMPORTANT INFORMATION ON INDUSTRY FLOOR PAINT® Test the paint prior to application, as adhesion can vary according to the road surface and weather conditions
• When marking sealed or treated surfaces, we recommend testing the paint for compatibility, drying time and adhesion in each case
• The surface may need to be briefly sanded back or a primer may need to be used to ensure optimal adhesion
• If the surface has not been prepared accordingly, the marking paint may peel off after a short period of time.