Industry Floor Paint antislip® ground marking paint, capacity 5 l, white.

Estimated delivery: 41 days

Industry Floor Paint antislip® ground marking paint, capacity 5 l, white

• Hazard warning = h226: flammable liquid and vapour, h362: may cause harm to breast-fed children, h335: May cause respiratory irritation, h336: may cause drowsiness and dizziness, h410: very toxic to aquatic life with long lasting effects
• Supplementary hazard information = EUH066: repeated contact can lead to brittle or cracked skin
• Safety information = P210: keep away from heat, hot surfaces, sparks, open flames and other ignition sources
• Do not smoke, P280: wear protective gloves/protective clothing/eye protection/face protection, p304+P340: remove person to fresh air, p308+P313: if exposed: get medical advice
• Colour = white
• Contents = 5 l
• Hazard class = GHS02, GHS07, GHS09
• Product type = floor paints
• Customs tariff number = 32082090
• Country of origin = PRT
• Gross weight = 5.5 kg
• Weight = 5 kg
• Sustainability = CO 2 footprint calculated
• For indoor use
• With anti-slip properties
• Hardwearing and durable
• Easy to use
• Is applied with a short-pile roller
• Easy to apply, with anti-slip properties
• Ideally suited for application on industrial floors, in warehouses, technical rooms, garages, car parks and much more
• The special formula of the anti-slip floor marking colour guarantees anti-slip and grip-providing surfaces wherever hazardous areas may occur, thereby contributing to a safer environment
• Floor marking colour Industry Floor Paint antislip® - Anti-slip properties (with added fine quartz granules) - Easy to clean - Does not yellow - Rough appearance - Chemical-resistant - VOC: max. 500 g/l VOC - Application temperature: +10 °C to +30 °C - Application using a short-pile roller - Thinning and tool cleaning: Diluant Floor Paint® thinner - Drying time: dry after approx. 1 hour, recoatable after approx. 8 hours Coverage: Up to 8 - 10 m²/l per coat ATTENTION: Before application, the floor should be cleaned or cleared of dust
• IMPORTANT INFORMATION ABOUT INDUSTRY FLOOR PAINT ANTISLIP® Test colour before application, as durability may vary depending on the substrate conditions and weather influences
• When marking sealed or impregnated floors, we always recommend testing compatibility, drying time and adhesion of the colour
• Brief sanding of the surface may be required, or a primer should be used to achieve optimal adhesion
• If the surface is not treated accordingly, the marking colour may wear off again after only a short time.