DURALINE® floor marking spray, contents 750 ml, red.

Estimated delivery: 36 days

DURALINE® floor marking spray, contents 750 ml, red

• Signal word = Gefahr
• Hazard warning = h222: extremely flammable aerosol, h229: pressurised container: may burst if heated, h336: may cause drowsiness and dizziness
• Supplementary hazard information = EUH066: repeated contact can lead to brittle or cracked skin., EUH211: Warning! Hazardous respirable droplets may be formed when sprayed
• Do not breathe in aerosol or mist
• Safety information = P101: If medical advice is needed, have product container or label at hand., P102: keep out of reach of children, P210: keep away from heat, hot surfaces, sparks, open flames and other ignition sources
• Do not smoke, P211: do not spray on an open flame or other ignition source, P251: Do not pierce or burn, even after use., p410+P412: protect from sunlight, do not expose to temperatures exceeding 50°C
• Colour = red
• Contents = 0.75 l
• Drying time = 20 min
• Hazard class = GHS02, GHS07
• Product type = spray paints
• Customs tariff number = 32082090
• Country of origin = FRA
• Gross weight = 1.08 kg
• Weight = 0.83 kg
• Sustainability = CO 2 footprint calculated
• Permanent floor marking spray for indoors and outdoors
• Marking spray for blocking off areas and for optimising traffic routes
• For line widths from 40 - 100 mm
• Weather resistant, hardwearing and suitable for stackers. - Marking spray for blocking off areas and for optimising traffic routes in factories, warehouses, production facilities and car parks, etc. - Optimal processing in a temperature range between +5 °C and +40 °C - Coverage approx. 100 m per spray can, depending on the width of the line, the paint applied and the composition of the floor - The ground must be free of dust, grease and other dirt - Ideal in combination with the DURALINE® EasyTrack marking trolley, the DURALINE® EasyTrack S marking rod or the DURALINE® EasyMover marking gun (see Combinations) Drying times: Can be walked on after approx. 20 minutes
• Can be driven over after approx. 2 hours Fully hardened after approx. 12 - 24 hours
• After use, briefly spray the nozzle free of residue to prevent the nozzle from clogging
• The following conditions must be met for an optimal application quality of DURALINE® 750 paint: - The surface must be cleaned thoroughly and free of dust, dirt, grease and other residues - Humidity: 10 - 50% and processing temperature: min. 5 °C - The first spraying process should be a quickly applied base coat, and subsequent coats applied slowly for optimum coverage